AMERICAN CAR CRAFT INSTRUCTION
CORVETTE 5TH BRAKE LIGHT CROSS FLAG
PART#032047
PARTS INCLUDED:
___1-Stainless Brake Light Bezel
1. Thoroughly clean the surface of the factory brake light lens with alcohol to remove
any and all dirt and wax. Test the surface by applying a strip of masking tape to see if the
surface has been cleaned enough to achieve a tack. Before you permanently attach the
bezel it is important to shape the new bezel by hand so that it exactly matches the
shape of the factory lens without having to force the bezel to set flat. NOTE: If you
consider that metal will NOT bend itself out of shape than you can expect that if you
install a nicely shaped bezel conformed to the factory lens that it will remain in place
and not lift off the factory lens over time or being exposed to the elements.
2. Now that you have a nicely shaped bezel simply remove the release liner from the
back of the new bezel and carefully set the bezel in position. Press the bezel firmly along
its entire length to set.
DO NOT GET WET FOR 24 HOURS!
Commentaires sur ces manuels