American-car-craft Corvette Fog Light Grille 2Pc Polished 1997-2004 C Manuel d'utilisateur télécharger pdf

AMERICAN CAR CRAFT INSTRUCTIONS

C5 BILLET GRILLE INSERTS

PART #032010

PARTS INCLUDED:

2- Billet Grille Inserts

4- Long Zip Ties

2-Stainless Brackets

2-Adhesive Promoter Packs

PLEASE READ ENTIRE INSTRUCTIONS BEFORE BEGINNING INSTALLATION!!

1. Using 2” masking tape, line the entire area, top bottom and sides of both your left and

right fog light openings to protect your painted surface.

2. Temporarily insert one of the grilles. Looking at the vertical bars behind the grill,

mark their location on the top and bottom of the masking tape then remove the grille.

3. You have been provided with two stainless brackets marked driver and passenger.

These brackets are to be installed with the red attachment tape facing up and the tab

the tape is mounted to facing towards the back of the car. Before installing these

brackets prep the upper opening of the black fog light housing area by first cleaning

with household isopropyl alcohol to remove any and all dirt, and then swipe the top

area once with the adhesive promoter (provided). Remove the red liner from the

bracket and insert the bracket by gently lifting the lower painted grill opening away

from the black fog light housing surround slipping the lower tongue of the stainless

bracket underneath the painted area as you line up the vertical bars of the bracket with

the two marks you made earlier on your masking tape. Then set and press the top so

that the entire bracket fits upright into position. PLEASE NOTE: It will be necessary

to squeeze the bracket like an accordion into a tighter “Z” shape. This will help you

maneuver the bracket under the painted edge. Then line the two vertical legs of the

bracket to your marks and decompress the brackets so as to allow you to affix the

attachment strip to the fog light housing.

1 2

AMERICAN CAR CRAFT INSTRUCTIONS C5 BILLET GRILLE INSERTS

Page 2

4. Once the bracket has been successfully positioned and installed you can now mount your grille. Place your grille into position zip tie it into pla

Pas de commentaire

American-car-craft Corvette Fog Light Grille 2Pc Polished 1997-2004 C Manuel d'utilisateur